Langue actuelle
    Changer de langue

    Armoire de stockage d'énergie à refroidissement liquide 261 kWh | Système de stockage d'énergie industriel extérieur IP54

    261 kWh

    G125K-LE260 Liquid-Cooled Energy Storage Cabinet is an all-in-one C&I battery energy storage system with an integrated 130.5kW PCS, purpose-built for peak-valley arbitrage, demand management, PV self-consumption and backup power. It combines 5 battery packs of 166.4V/314Ah in series (1P260S configuration), delivering a rated voltage of 832V, a rated energy of 261 kWh, and a wide voltage range of 728~936V — a complete, plug-and-play DC-to-AC block that installs on site with minimal wiring.

    At its core are 314Ah large-format LFP (lithium iron phosphate) cells avec 157A standard charge/discharge current at a 0.5C rate, meaning a full 261kWh charge or discharge in about two hours — well matched to daily peak-valley cycling. The system delivers up to 8,000 cycles (EOL 70%, 90% DOD) — roughly 30% longer service life than conventional 6,000-cycle systems — significantly lowering the levelized cost of energy (LCOE) across its lifetime.

    Unlike air-cooled cabinets, G125K-LE260 adopts intelligent liquid-cooling thermal management with an ethylene glycol / water (50%:50%) coolant loop. Liquid cooling keeps cell temperature difference within a tight band, supports stable operation from -20℃ to 50℃ at up to 95% RH, and slows capacity fade — a decisive advantage in hot climates such as the Middle East, Africa and Southeast Asia.

    The IP54 enclosure integrates the battery cluster, 130.5kW PCS, BMS, aerosol fire-suppression system avec temperature and smoke detection, and thermal management in a compact 970×1420×2320mm footprint weighing ≤3,000kg. Factory pre-assembled and tested, it requires only electrical connections on site. With RS485 / CAN communication, it integrates seamlessly with mainstream inverters and EMS platforms for remote monitoring and multi-cabinet paralleling for larger capacities.

    Numéro de modèle :G125K-LE260
    Taper:261 kWh
    Pile :LFP314Ah
    Bloc-batterie :166.4V314Ah
    Rated voltage(V) :832V(5-module series)
    Rated energy(kWh):261 kWh
    Voltage range(V):728~936
    Combination method:1P260S
    Rated power(kW):130.5
    Rated charge and discharge rate :0.5P
    Standard charge and discharge current :157A/157A
    Dimensions : L*P*H (mm) :970*1420*2320
    Poids (kg) :≤3T
    Niveau:IP54
    Operating temperature range [°C]:-20 à 50 °C
    Humidité relative :RH≤95%
    Altitude (m) :<2000m
    Cooling method:Liquid cooling
    Coolant:Ethylene glycol: aqueous solution (50%v: 50%w)
    Number of cycles:EOL70% 8000 times DOD90%
    Système de protection incendie :Aérosol
    Detector :Warmth sensation, smoke sensation

    Caractéristiques du produit

    • 01

      All-in-One with Integrated 130.5kW PCS

      Battery cluster, 130.5kW PCS, BMS, fire suppression and thermal management are all integrated in one cabinet. A complete 832V / 261kWh (1P260S) DC-to-AC block — no external inverter or transformer needed, plug-and-play on site.

    • 02

      Intelligent Liquid-Cooling Thermal Management

      Liquid cooling with an ethylene glycol / water (50%:50%) coolant loop keeps cell-to-cell temperature difference tightly controlled, ensuring stable output from -20℃ to 50℃ and up to 95% RH, and significantly slowing capacity fade in hot climates.

    • 03

      Technologie avancée des cellules de batterie

      Built with Grade A LFP 314Ah lithium iron phosphate cells in a 5-pack series configuration. Fewer cells and connection points than conventional solutions enable more precise BMS management and higher system reliability.

    • 04

      Multi-Level Safety Design

      Aerosol fire-suppression system with temperature and smoke detection, plus IP54 protection and cell-level BMS monitoring — a cell-to-cabinet layered safety design that meets C&I site safety access requirements.

    Avantages du produit

    8,000 Cycles, Longer Service Life

    8,000 cycles at EOL 70% / 90% DOD — about 30% more than conventional 6,000-cycle cabinets, directly lowering the lifetime cost per kWh.

    Liquid Cooling, Hot-Climate Ready

    Superior thermal control versus air cooling — the preferred choice for Middle East, Africa and Southeast Asia projects where ambient temperatures regularly exceed 40℃.

    Charge/décharge rapide, réponse rapide

    130.5kW / 261kWh at 0.5C — a full charge or discharge in about 2 hours, with 157A continuous current for demanding daily cycling.

    Compact Footprint, Easy Deployment

    Only 970×1420×2320mm — one of the smallest 261kWh liquid-cooled blocks on the market. Factory pre-assembled and tested; on-site work is electrical connection only, with multi-cabinet paralleling supported for larger plants.

    FAQ

    • À propos de Zhongyue ?

      Anhui Zhongyue Energy Storage Technology Co., Ltd. (Zonyue) est située à Hefei, dans la province d'Anhui, un pôle majeur des énergies nouvelles en Chine. Entreprise de haute technologie, nous sommes spécialisés dans les solutions intégrées photovoltaïques et de stockage d'énergie. Intégrant la R&D, la production, la vente et le service après-vente, nous nous engageons à fournir à nos clients du monde entier des produits et services de stockage d'énergie sûrs, performants et fiables. Nous sommes votre partenaire de confiance sur la voie de l'indépendance énergétique et du développement durable.
    • La capacité de l'armoire de stockage d'énergie est-elle réglable ?

      Each battery pack is 52.2kWh (166.4V / 314Ah), and the packs are connected in series — the 261kWh cabinet is fully loaded with 5 packs (832V, 1P260S configuration). Removing one pack reduces the capacity by about 52kWh and the voltage by 166.4V, so please confirm the voltage window of your inverter or PCS before adjusting the configuration. For larger capacities, multiple G125K-LE260 cabinets can be paralleled at the AC side — e.g. 2 cabinets for ~522kWh — so you can start small and scale up without wasting the initial investment.
    • Quels modes de paiement acceptez-vous ?

      100% T/T à l'avance ou 30% T/T dépôt, et le solde 70% payé avant l'expédition.
    • Comment puis-je vous faire confiance ? Que se passe-t-il si vous n'expédiez pas la commande après le paiement ?

      Nous sommes une usine située à Hefei, en Chine, légalement enregistrée et vérifiable auprès du registre du commerce chinois. Notre site web est également certifié ICP et officiellement enregistré. Pour instaurer un climat de confiance, nous proposons des visites virtuelles de notre usine en direct ou des appels vidéo à tout moment.

    Étiquettes :

    WhatsApp

    Laissez un message !

    Laissez un message !